This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
Pages: 1
I have a 1973 MK2 which I am going to part out or will sell cheap . Starboard deck rebuilt with west epoxy and balsa need finishing. Started to repower with Yanmar diesel. Lost interest and not enough time as I am moving. West of London off 401 on steel cradle ,can deliver., johnsjmc(at) sympatico.ca 519-870-3134 Complete with sails and Yanmar diesel $4500 Engine alone $2000 Boat with sails and no motor on cradle $3000
Last edited by (2009-09-30 00:46:33)
Offline
Hi there,
Any chance you have a bimini for your boat that you would sell? Also curious about your sails. I have a '73 MK II, and my main is pretty tired and baggy.
Thanks
Ian
Offline
No Bimini but I have about a dozen sails some are like new others are worn. I have a very good dacron main . Would like $400 will have to check who made it.
Offline
Hi John,
I have a MK II 74 and I'm looking for a spinnaker would you happen to have one and if so would you be interested in selling it ?
Thank you
Sylvain
Offline
John, if you reach the point of parting out your boat, I may be interested in your blower motor for the engine compartment. Is the original C&C blower? What kind of condition is it in? Are the bearings/bushings making any noise?
I am not in any hurry here, but if you come to that point I would be interested in discussing it with you. My original C&C-installed "cage" blower bit the dust and the replacement "in-line" blower is not making me happy at the moment.
Marcus from Carriden
Mk III, Hull #847
Oakville, Ontario
Marcus Opitz,
Formerly from Carriden, Mk III, Hull #847,
now skippering "Everdina," a 1975 Ontario 32
Offline
Hi John,
Just wondering if you had a chance to look for those spinnakers.
Thank you
Sylvain
Offline
I'd be interested in a quality main
John
Molly J
Last edited by (2009-08-26 23:10:16)
Molly J
Offline
Any change you have a decent No. 3 genny?
Marcus,
I'm a little late to this thread, but I replaced what was no doubt the original blower on my MKI (hull# 167) with a Jabsco from Defender a couple of years ago. It looked just like the original, went right in where the old one was, and cost $46; been working fine since. part# 900250.
Chris
Chriswheat Second Wind
Chesapeake Bay MD
Chriswheat Second Wind
Chesapeake Bay MD
Offline
Several extra sails sold. Lowered price complete boat with sails and diesel motor and cradle $4500. boat and cradle $3000. Yanmar 2gm $2000. Newer spinnaker and pole $450 ,old spinnaker $150.No small parts until a large component like mast is sold. delivery possible call 519-870-3134
Last edited by (2009-09-30 00:48:20)
Offline
Just picked-up two spinnakers and pole from John...both barely used and in excellent condition. Many thanks
Ivan R. Vulicevic
Mark III, Hull 718
C-Wolf
C-Wolf
Offline
John, I see you have sold spin pole and sails, but do you have a whisker pole please? I need one !!
Thanks
Alan of SMOKE 1984 Mk V 002
Alan of SMOKE 1984 Mk V 002
Offline
John or anyone, I need a boom and a mainsail as well as a jib for my Mk3 - mine were stolen, so I am beached for this season unless I find something.
Last edited by (2010-04-03 23:49:47)
Offline
The whole boat is still for sale I have been in Florida for the winter and just signed on tonight for first time since before Christmas. The mast and boom is available but will mean I will then part out the boat which is a shame. Email me johnsjmc(at)sympatico.ca or call me 727-278-1416
Offline
I also still have a full set of sails and the Yanmar diesel and a steel cradle.
Offline
UPDATE NOV 15 I have moved the boat to London. I sold off lots of extra sails etc. Still have a complete MK 2 boat with a Yanmar 2GM diesel. sitting on a steel cradle.It needs finishing but is still well worth saving $3500 all John 519-870-3134
Offline
Good Morning John, how are you making out with your Mark ll May need a rudder should you decide to part it out. Best Regards, Tim AllenTim Allen
Tim Allen
Offline
Pages: 1