This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
Pages: 1
e=1>
e=3>I have a ’89 Wave 26, which appears to be an identical hull to the late 80’s 27.
e=3>My question is, does anyone know where I could purchase a stern pulpit? Given the similarities of the 26 and 27s, I thought someone might have a clue. Also, does anyone know of any Wave 26 owners in the Chesapeake area? I sail out of Colonial Beach, Va. and on any given weekend, am usually on the Potomac River.
e=3>Thanks in advance for your help and considerations
Last edited by (2004-09-30 07:05:19)
For a long time, C&C's pulpits were made by a Michigan company called Tops In Quality <www.topsinquality.com>. They may have your design on file. Shipping something from Michigan, though, could end up being a big percentage of the price. Surely there are scads of stainless fabricators in your neck of the woods?
David Weatherston
Towser, Toronto
C&C 27 Mk IV
David Weatherston
Towser, Toronto
C&C 27 Mk IV
Offline
Try Klako Marine in Grimsby, Ontario <A href="http://klackomarine.ca/index2.html">http://klackomarine.ca/index2.html</A>
I know they have the staunchion base for your boat, and they also do custom orders.
Jim
Distant Thunder MKV
Take a look at the following Web URL:
<A href="http://www.southshoreyachts.com/PLT4.HTM">http://www.southshoreyachts.com/PLT4.HTM</A>
South Shore Yachts stocks a lot of old C&C parts inventory, and can fabricate most of what they don't have.
e=3>Thanks to everyone for the information. While there are several fabricators in my area, I thought perhaps there was a source elsewhere for replacement original equipment, or maybe even used stuff.
e=3>I appreciate the leads and will follow through.
an">
e=3>Rick Quann
e=3>Fredericksburg, VA.
e=3>C & C Wave 26 “B2” (as in B square, the mathematical term, named in honor of my two kids; Bridgette & Ben)
Pages: 1