This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
I have to change the Zincs and replace a couple of through hull valves and am planning to use our tidal grid. Looking at the swept back shape of the Mark 2 keel I am rather concerned that she might tip forward. Has anybody done this with a Mark 2. I am wondering if I need to put some sort of support under the bow.
Have a look at the thread, "Tidal Grid, Bottom Paint" <http://www.cc27association.com/f3/toast/toast.asp?sub=show&action=posts&fid=2&tid=2296 >.
As you will see, the owner decided the whole process was too iffy. We were all very disappointed as we were looking forward to the photos.
David Weatherston
Towser, Toronto
C&C 27 Mk IV
David Weatherston
Towser, Toronto
C&C 27 Mk IV
Offline