This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
Pages: 1
Would anyone have or know where I could get detailed wiring schematics of the instruments in the control panel? I have a '75 mark 3.
Any help would be greatly appreciated.
heinz
Heinz, the wiring diagram in the owner's manual is fairly rudimentary but nonetheless complete as long as you have the original five-fuse panel under the bridge deck. I'd be happy to mail you a copy or, if you have a fax, send it that way. Main schematic with wiring code, and mast and lighting wiring layout would be four pages. Let me know your preference.
Ken Pole
Santiva
Ottawa
Ken Pole, Ottawa
1975 Mark III Santiva
Offline
Ken, if you could fax me the pages that would be great.
My fax no is 416 585-7247
If you like to take a look at my current schematic, I have recreate the wiring diagram and could also send you a pdf file. I will need your e-mail address since it does not appear that I can attach a file to this message.
You can also reach me by e-mail at <A href="mailto:7kab3@sympatico.ca">7kab3@sympatico.ca</A>
thanks so much
heinz
One of the privileges of membership in the C&C 27 Association is no-extra-charge access to a .pdf copy of the manual (initial copy will be circa 1980 - variants will appear as they are identified, but we don't expect much in the way of substantive differences). The manual is currently in preparation (should be ready in about 2 weeks). In the interim, individual pages will be available on request.
David Weatherston
Towser, Toronto
C&C 27 Mk IV
David Weatherston
Towser, Toronto
C&C 27 Mk IV
Offline
Pages: 1