This Forum is supported by C&C 27 owners like you whose membership in the C&C 27 Association makes possible this Forum and the accompanying site. Thank you, members, for your continuing commitment.
You are not logged in.
I have a 27 late mk 2 ,wheel steering,steel cradle and 2 cyl Yanmar diesel . Soft startboard deck has been repaired, now solid needs finish sanding and topside paint. newer 2 cyl Yanmar diesel sitting in cabin not hooked up. Boat has newer cushions,steel cradle wheel steering and 4 or 5 bags of older sails. I have the skills to finish this project but can never find the time. Boat can be moved on a car trailer or add axles to the steel cradle and make it a trailer.( have 2 new axles extra$) Boat and cradle $3500 complete or $2500 no engine johnsjmc@sympatico.ca 519-870-3134
Boat is in London Need it gone as I am thinking about selling the property where I store it. I had it for sale here some time ago and had lots of interest but no sale. Might scrap it if interest in large component like mast or keel . Shame to do that as it is a good boat cheap. SOLD
UPDATE NOV 15 I have moved the boat to London. I sold off lots of extra sails etc. Still have a complete MK 2 boat with a Yanmar 2GM diesel. sitting on a steel cradle.It needs finishing but is still well worth saving $3500 all John 519-870-3134
I also still have a full set of sails and the Yanmar diesel and a steel cradle.
The whole boat is still for sale I have been in Florida for the winter and just signed on tonight for first time since before Christmas. The mast and boom is available but will mean I will then part out the boat which is a shame. Email me johnsjmc(at)sympatico.ca or call me 727-278-1416
Several extra sails sold. Lowered price complete boat with sails and diesel motor and cradle $4500. boat and cradle $3000. Yanmar 2gm $2000. Newer spinnaker and pole $450 ,old spinnaker $150.No small parts until a large component like mast is sold. delivery possible call 519-870-3134
Thanks I wasn,t sure you saw my first reply John
I have a MK 2 mast and boom . I can deliver to Toronto if necessary. Waiting for a reply [email]johnsjmc@sympatico.ca">johnsjmc@sympatico.ca</a> 519-870-3134
No Bimini but I have about a dozen sails some are like new others are worn. I have a very good dacron main . Would like $400 will have to check who made it.
I have a mk2 mast and boom and a large assortment of sails. Considering parting out the boat. West of Toronto but could deliver if needed in Ontario 519-768-3133 [email]johnsjmc@sympatico.ca">johnsjmc@sympatico.ca</a>
I have a Yanmar 2GM with all parts required to install .Can be heard running. New mounts,fuel filter used mufflers near London 519-768-3133 johnsjmc(at) sympatico.ca
I have a 1973 MK2 which I am going to part out or will sell cheap . Starboard deck rebuilt with west epoxy and balsa need finishing. Started to repower with Yanmar diesel. Lost interest and not enough time as I am moving. West of London off 401 on steel cradle ,can deliver., johnsjmc(at) sympatico.ca 519-870-3134 Complete with sails and Yanmar diesel $4500 Engine alone $2000 Boat with sails and no motor on cradle $3000
Call Klacko marine in oakville I needed a boom replaced on a 34' WD Shock. as there were 2 cracked fittings which were unavailable. They provided a new(used ) boom modified the length and rigged it with slab reefing for $500 That was about the coat of one of the end castings if I could have gotten it
I have a complete MK2 I am considering parting out. Located west of London off 401 What is my mast worth? john 519-870-3134
I have built 3 trailers 2 for 27s. I found the easiest way was to buy a partially completed tandem axle utility trailer and modify it.That way you get a new 7000 lb trailer with brakes as a starter for under $2000 I used 4 posts placed as the cradle and added 6" adj. screws.I used a 4x2 C channel at the centre to locate the keel.I would extend the centre keel support all the way to the tongue to further stiffen the frame if I make another
Wife wants it gone 1973 Mk 2 ,wheel steering newer cushions,steel cradle .Repaired soft starboard deck(needs final sanding and paint,reassembly.Excellent Yanmar 2 GM with lots of new parts (motor mounts,racor filter,proper exhaust,instrument panel etc sitting in engine compartment needing final hookup. 12 bags of good sails,spinnaker pole etc. Bought newer bigger boat and lost interest. Package deal $7500 Can deliver 519-870-3134
Lowered to $7500 just want it gone. Yanmar 2gm is A1 with new motor mounts,fuel filter,correct exhaust ,vetus mufflers ,Instrument panel ,new 60 amp alternator etc. 12 bags of good sails 2 spinnakers ,pole etc 519-870-3134 John
The wiring is quite simple and is in the shop manual Should be on the net somewhere also. Only about 6 or 7 wires . Ground plus battery plus 1 for starter solenoid ,1 or 2 for alternator plus tach,oil press and temp.Others in the harness are for saildrive seal failure
Email is johnsjmc(at)sympatico.ca Any interest? ????
I have a 1973 MK2 sitting on a tandem trailer with a 2cyl Yanmar (2gm) partially installed.Wheel steering, 12 bags of assorted sails,newer cushions,etc.I bought the boat a year ago and repaired a soft spot on the starboard deck(needs final finishing).I removed and sold the A4 and started to install a good Yanmar 2gm I have.I then bought a larger newer boat to sail last summer. Wife wants one boat gone. Boat ,trailer and diesel as a package delivered (up to 250 mi) $12500.John 519-768-3133/519-870-3134 Located near London johnsjmc (at) sympatico.ca
Used atomic 4 engine and trans .Partial rebuild in 1990s Was running before removal. has a new carb,electric pump and includes alternator and starter. Cold compression 110 in 3 cyl and a little low at 95 in the fourth. Probably a grain of carbon on a valve seat and may come up when run. Located in Ont . $700 delivered between Toronto to Windsor 519-768-3133 johnsjmc@sympatico.ca
I,ve used the drill /fill method with good results but it is tedious.A simple step you can consider if you are resealing in one step is to countersink the holes from above before sealing.This way when the 5200 is being squeezed out a plug of it will remain around the base of each fastener.Hopefully this "collar" will result in a longer life seal .Another spot to worry about on the 27 is the window seal.I am rebuilding a deck on a Mk2 where I initially thought water entered by the chainplates but after "excavation" I am now convinced most of the damage was caused by water entering from the bottom edge of the larger window and working it,s way outboard.
I have a Yanmar 2GM engine and transmission for sale with the components needed to install in a C&C27. Engine is a 13hp 2cyl diesel.Hour meter shows 600 hours.It includes a new 60 amp alternator,new water pump,new Racor marine fuel/water filter,4 new motor mounts, correct exhaust elbow,and vetus watertrap mufflers,instrument panel, correct matched propeller and some hose , spare parts and manuals.I can demonstrate it running. I spent a year finding all the parts.The new parts alone cost over $1000. I just bought a larger boat and I,m selling complete package.$2995.I also have a 27 mk 2 for $9995 which was to get the repower . Sell your Atomic 4 while still running and recover perhaps $1500. john 519-768-3133 johnsjmc (at) sympatico (dot) ca.
Ihave a 1973 mk2 for sale. I have a good tandem trailer as well. contact me for info on both
johnsjmc (at) sympatico.ca (address modified by admin)
519-768-3133
I have been offered a 1973 mk 2 at a quite reasonable price. I can deliver it to anywhere in Ont. $8500Cdn including delivery. Anyone interested? It needs a good cleaning and probably bottom paint which I will probably do..Same owner 15 years. good boat. email if interested <A href="mailto:johnsjmc@sympatico.ca">johnsjmc@sympatico.ca</A>